Our Technology & Equipment

Optimal performance

Versatile ability of IHC Hydrohammer, which are S-series and Sc-series

IHC Hydrohammer has developed two type, which is high performed, multiple functioned, and reliable.

Concrete pile driving by SC-200
Concrete pile driving by SC-200

S-series

S-series hydrohammers are designed especially for driving steel pipe pile with underwater condition. The maximum blow rate of ram weight is approximately 6.5 m/sec., which equals 2-meter drop height. Depend on the pile condition, you just need to adjust the stroke like driving concrete pile.

SC-series

SC-series hydrohammer is mostly designed for concrete pile. The maximum blow rate is lower. Therefore, ram weight of the hammer is designed as heavier than S-series.(about 5.5 m/sec) Also, shape of the SC-series are shorter & wider than S-series.

Professional assistence

Construction fields and work site in the world have chosen IHC Hydrohammer as the most suitable equipment for pile driving based on its practice.

Hammer type S-series(S-30~S-200)

Operational Data

S-30 S-35 S-70 S-90 S-120 S-150 S-200
Max. Blow Energy(kNm) 30 35 70 90 120 150 200
Min. Blow Energy(kNm) 2 2 2 2 6 6 10
Blow Rate at Max Blow(bl/min) 65 60 50 50 44 44 45

Weight

S-30 S-35 S-70 S-90 S-120 S-150 S-200
Ram Weight(ton) 1.5 3 3.5 4.5 6.2 7.5 10.0
Hammer with Ram Weight(ton) 3.7 7.1 8.3 9.6 14.3 16.2 24.5

Dimensions

S-30 S-35 S-70 S-90 S-120 S-150 S-200
Outer Diameter(mm) 457 610 610 610 712 712 915
Length(mm) 5745 5600 7130 7880 7960 8710 8920

Hydraulic Data

S-30 S-35 S-70 S-90 S-120 S-150 S-200
Working Pressure(bar) 280 220 230 280 250 280 250
Oil Flow(l/min) 160 160 220 220 460 460 750
Engine(kW) 130 130 167 167 344 344 435
Hydraulic Hose(ID)(mm) 25 32 32 32 38 38 50

Hammer type S-series(S-280~S-2300)

Operational Data

S-280 S-500 S-600 S-900 S-1200 S-1800 S-2300
Max. Blow Energy(kNm) 280 500 600 900 1200 1800 2300
Min. Blow Energy(kNm) 10 20 20 45 60 180 230
Blow Rate at Max Blow(bl/min) 45 45 36 30 30 30 30

Weight

S-280 S-500 S-600 S-900 S-1200 S-1800 S-2300
Ram Weight(ton) 13.6 25.0 30 45 60.0 75.0 115
Hammer with Ram Weight(ton) 29.0 55.0 63 125 138.0 200.0 260.0

Dimensions

S-280 S-500 S-600 S-900 S-1200 S-1800 S-2300
Outer Diameter(mm) 915 1220 1220 1625 1625 1830 1830
Length(mm) 10190 10200 11000 12785 14065 15840 18040

Hydraulic Data

S-280 S-500 S-600 S-900 S-1200 S-1800 S-2300
Working Pressure(bar) 300 300 280 250 310 230 300
Oil Flow(l/min) 750 1400 1500 2800 2800 4500 4500
Engine(kW) 435 1040 1040 Customize
Hydraulic Hose(ID)(mm) 50 2×50 2×50 76 76 100 100

Hammer type SC-series

Operational Data

SC-50 SC-75 SC-110 SC-150 SC-200
Max. Blow Energy(kNm) 50 75 110 150 200
Min. Blow Energy(kNm) 1 3.7 6 10 10
Blow Rate at Max Blow(bl/min) 50 50 40 40 40

Weight

SC-50 SC-75 SC-110 SC-150 SC-200
Ram Weight(ton) 3.3 5.7 7.9 11.0 13.6
Hammer with Ram Weight(ton) 5.9 98 14.1 18.75 26.5

Dimensions

SC-50 SC-75 SC-110 SC-150 SC-200
Outer Diameter(mm) 660 762 1020 1020 1330
Length(mm) 5280 6115 5600 6380 5660

Hydraulic Data

SC-50 SC-75 SC-110 SC-150 SC-200
Working Pressure(bar) 220 270 260 280 280
Oil Flow(l/min) 200 250 460 460 750
Engine(kW) 167 167 344 344 435
Hydraulic Hose(ID)(mm) 32 32 38 38 50

Page Top